Can be programmed for most coins. Mounting kits are also available (CN0023). Size W 130mm, H 185mm, D 44mm. Will accept up to 3 coins per second. Acceptance of a coin is signalled on an open collector PNP transistor output line. This is a positive pulse of between 50 - 150mS. The common output on pin 1 should be between 10 and 26V. Coin inhibits should be held low to accept coins. Individual coins can be inhibited (not accepted) by leaving the line above +2V or open. The MS111 can be used with a 3 coin (MS125) or a 4 coin (MS126) separator to send the coins to different places. The operation of the newer Cashflow is more complicated than the older models, but the pin connections are the same. All connectors are 0.1" pitch and can be found here.
| 13 pins. | 15 pins. | 17 pins. | Sentinel 35/220 |
| 1-Coin 6 output. | |||
| 1-Coin 5 output. | 2-Coin 5 output. | ||
| 1-Output common. | 2-Output common. | 3-Output common. | 1-Output common. |
| 2-Coin 1 output. £1 | 3-Coin 1 output. | 4-Coin 1 output. | 2-Coin 1 output. £1 |
| 3-Not Used. | 4-Not Used. | 5-Not Used. | 3-Not Used. |
| 4-Coin 2 output. 50p. | 5-Coin 2 output. | 6-Coin 2 output. | 4-Coin 2 output. 50p. |
| 5-Coin 3 output. 20p. | 6-Coin 3 output. | 7-Coin 3 output. | 5-Coin 3 output. 20p. |
| 6-Not Used. | 7-Not Used. | 8-Not Used. | 6-Select. Normally open. |
| 7-Coin 4 output. 10p. | 8-Coin 4 output. | 9-Coin 4 output. | 7-Coin 4 output. 10p. |
| 8-Coin 4 inhibit. | 9-Coin 4 inhibit. | 10-Coin 1 inhibit. | 8-Coin 4 inhibit. |
| 9-Supply +12V. 750mA. | 10-Supply +12V. | 11-Supply +12V. | 9-Supply +11-15V. 2A. |
| 10-Supply 0V. | 11-Supply 0V. | 12-Supply 0V. | 10-Supply 0V. |
| 11-Coin 3 inhibit. | 12-Coin 3 inhibit. | 13-Coin 3 inhibit. | 11-Coin 3 inhibit. |
| 12-Coin 2 inhibit. | 13-Coin 2 inhibit. | 14-Coin 2 inhibit. | 12-Coin 2 inhibit. |
| 13-Coin 1 inhibit. | 14-Coin 1 inhibit. | 15-Coin 1 inhibit. | 13-Coin 1 inhibit. |
| 15-Coin 5 inhibit. | 16-Coin 5 inhibit. | 14-Coin 5 and 6 inhibit. | |
| 17-Coin 6 inhibit. | 15-Coin 7 and 8 inhibit. |